top of page

Commercial Paving. Berwyn, PA
 
This project consisted of milling almost all of the parking lot to a depth of 1.5”. The lot was the swept clean and all debris was removed off site. After some base paving against some new concrete, the entire milled parking lot was tack coated and paved with 1.5” of compacted 9.5mm wearing course asphalt. After the paving was complete, the new asphalt was striped. The one area that was not milled and paved was seal coated and re-striped. This project was slightly over 11,000 Square yards of milling and paving.

bottom of page