Commercial and Residential Projects
Pictures of some of the paving projects completed by Oakes Paving Llc.
COMMERCIAL COMPLEX - HORSHAM
This project included removal of asphalt curbing, installation of new belgian block curbing, asphalt milling and paving. There was over 6,000 feet of belgian block curbing installed. Oakes Paving milled approximately 5,500 sq. yards at a 2.5″ depth. The last phase was the paving, which measured in at approximatley 21,000 sq. yards.
COMMONWEALTH NATIONAL G.C.
This project involved milling the roadway to a depth of 2" Our crew did some base repairs to ready the road for paving. We then installed a 2" compacted layer of binder course asphalt followed by a 2" compacted layer of 9.5mm wearing course asphalt. Approximately 750 tons of asphalt was used on this job.
Commercial Projects 2017
Here are a few of the projects we completed during the 2017 paving season in Pennsylvania and New Jersey.
COMMERCIAL PARKING LOT - PLUMSTEADVILLE
This project involved our crew milling and excavating approximately 500 yards of deteriorated blacktop. We then graded and compacted the stone base. Installed 2 inches of BCBC binder course asphalt. Our crew then used a scratch coat to bring all low lying areas up to create a smooth parking lot to resurface.
PARKING LOTS - LANSDALE
This project consisted of two phases. All garages had 7' of the concrete floors removed and replaced. New underground drain pipes were installed and new drain boxes were also installed. The parking lots were milled down to the stone base. Several areas of one lot were excavated to a depth of one foot due to unsuitable soil and filled with 1.5" stone. The parking lots were then graded for proper water flow. We then paved both lots with 2" of 19mm binder followed by a 1.5" layer of 9.5mm wearing course asphalt.